Preventative Maintenance; Daily Maintenance; Weekly Maintenance; Monthly Maintenance - Star Trac Pro Owner's Manual

Use the
the target watts rate in 1 watt increments.
When the desired target watts rate has been entered, press the
7. If desired, you can use the personal cooling fan during your workout (see "Using the Cooling Fan" for details).
8. For Elite models only: If desired, you can use the SelectFit™ feature to alter or remove upper body workout for the
program (see "Using SelectFit™" for details).
9. You can scroll through workout data during the program (see "Viewing Workout Data During a Program" for details).
10. If you wish to pause the program, stop striding. The CrossTrainer will enter pause mode and display your workout results
for one entire cycle.
11. When you have reached your workout goal, the CrossTrainer enters the Cooldown cycle (see "Cooldown Cycle" for details).
If you wish to exit the program before you have reached your workout goal, stop striding and allow the Pause timer to
expire.
P
REVENTATIVE
With durable, high performance components, STAR TRAC PRO / ELITE are designed for heavy usage with minimal maintenance
required. To keep your CrossTrainer in top condition, Star Trac strongly recommends performing the regular daily, weekly and
monthly preventive maintenance routines outlined below. Any unusual symptoms, such as a loud continuous noise during opera-
tion, should be reported to STAR TRAC PRODUCT SUPPORT DEPARTMENT at (800) 503-1221, or USA 1-714-669-1660.

DAILY MAINTENANCE

Remove excessive accumulations of dust, dirt, and other substances by using a clean, soft cloth and a non-abrasive liquid clean-
er, such as Formula 409
and heart rate grips.
NOTE: DO NOT spray the cleaner directly onto the Display Panel or heart rate grips.

WEEKLY MAINTENANCE

Perform the following services each week:
Vacuum the floor under and around the CrossTrainer. Move the CrossTrainer to another spot, if necessary, to vacuum
thoroughly.
Inspect the Display Panel mounting screws for security, and retighten if necessary.
Inspect the Display Panel keypads for wear.

MONTHLY MAINTENANCE

Perform the following services each month, or as needed:
Check that the pedals and shrouds are secure.
Check the upper body arms for looseness. Tighten screws as necessary.
Check for smooth and quiet operation of all moving parts.
24
keys to enter your target watts rate, or press the
M
AINTENANCE
or FANTASTIK . Wipe down the exterior of the display panel, upper body arms, pedals, shrouds
TM TM
key to accept the displayed value.
STAR TRAC PRO / ELITE CROSSTRAINERS O
or key, as desired, to increase or decrease
' M
WNER S ANUAL