Eizo FlexScan L365 User Manual page 22

English
4.
To adjust the output signal range (Dynamic Range) of the signal.
→
<ColorManagerment> menu.
This controls the level of output signal range to display the whole color gradation
(256 colors).
[Procedure 1]
Push the Auto adjustment button on the front panel while displaying the <Range
Adjustment> menu to automatically adjust the range. The screen blanks for a
moment, and adjusts the color range to display the whole color gradation of the
current output signal.
[Procedure 2]
Pressing Auto adjustment button while displaying the contrast/brightness
adjustment screen (appeared by pressing the control buttons directly) adjusts the
range automatically. (Contrast and Brightness will not be adjusted.)
5.
To smooth the blurred texts of the enlarged screen of the lower
resolutions.
→
<Smoothing> is clear-cut the letters or lines.
Select <Smoothing> in the screen menu and switch the setting to "Off".
NOTE
• The "Smoothing" is disabled in the resolution 1024 x 768.
• Since the displayed image is enlarged, the blurred texts may not be
necessarily lost completely.
22
4. ADJUSTMENT
Use the <Range Adjustment> (p.35)of
Switch the <Smoothing> setting.