Omron E5EN User Manual page 79

CHAPTER 5 PARAMETERS
Operation Level
MV monitor (OUT2)
This parameter is for monitoring the manipulated variable on the control output 2 side during
operation.
During heating and cooling control, the manipulated variable on the control output
2 side (OUT 2" terminal output) is monitored.
Function
Monitor
F
Related parameters
Standard/heating and cooling" (initial setting level) (p. 5 23)
Manipulated variable display" (advanced function setting level) (p. 5 39)
See
5-10
Control
Heating and cooling
The control must be heating and cooling con
trol.
Manipulated variable display must be set to
ON".
Monitor Range
0.0 to 100.0
Unit
%