CHAPTER 2
PREPARATIONS
J
Draw out
2-4
The main unit can be drawn out to perform maintenance without remov
ing the terminal compartment.
(1)
Prepare a screwdriver that can be used on the lower front screw of the unit.
(1) Loosen the lower front screw with a screwdriver (turning left) while
pushing the hook on the upper surface of the front panel.
(2) Grasp both sides of the front panel and draw (pull) it out.
(3) Ensure that the waterproof packing is in place before drawing in the
unit. Re tighten the lower front screw with a screwdriver (turning
right) to a torque of 0.3 to 0.5 N
upper surface of the front panel.
(2)
(3)
m while pushing the hook on the