Omron E5EN User Manual page 107

CHAPTER 5 PARAMETERS
Advanced Function Setting Level
Input digital filter
Sets the time constant of the input digital filter . The following figure shows the effect
on data after passing through the digital filter:
Function
Comment
Additional PV display
This parameter adds the facility of displaying only the PV . It is added to the top of the
operation level. It is used to give the option of displaying the PV and SP or just the
PV only .
Function
Comment
5-38
PV before passing through filter
A
Time
constant
Input digital filter
Setting Range Unit
0.0 to 999.9 Second
Setting Range
: Displayed / : Not displayed
PV after passing through filter
0.63A
Time
Default
0.0
Default
OFF