Omron E5EN User Manual page 63

CHAPTER 4 APPLIED OPERATION
J
Executing run/
stop control
Parameters
4-14
When event input assignment 1" or event input assignment 2" is set to
run/stop", control is started when event input 1 or 2 becomes OFF".
Control is stopped when this becomes ON".
While control is stopped, STOP lights.
Setting
Event input 1 or 2
Event input 1 or 2
When number of multi SP uses" is set to 0" or 1" that is not the
Note:
set point setting, run/stop control is possible according to event
inputs.
Event input assignments 1 and 2 are as follows according to the number
of multi SP uses" setting.
Parameter Name
Number of
multi SP uses
Event input assignment 1 None or Run/stop
Event input assignment 2 None or Run/stop
When the number of multi SP uses is set to either 1 or 2, and event input
assignment 1 or 2 is set to not displayed," the setting automatically
becomes none."
When the number of multi SP uses" is set to 0", and both input assign
ments 1 and 2 can be set, RUN/STOP is assigned to only one event
assignment. The other event assignment is automatically set to OFF.
Symbol Parameters : Level
Event input 1 assignment:
Advanced function setting level
Event input 2 assignment:
Advanced function setting level
Number of multi SP uses:
Advanced function setting level
Input Contact
ON
OFF
Setting
0 1
Not displayed (none)
None or Run/stop
Description
For event input function
State
STOP
RUN
2
Not displayed (none)
Not displayed (none)