Front / Rear Refl Ector Installation - Huffy Multi-Speed Comfort Bicycles Owner's Manual

Front / Rear Refl ectors Installation (various models)
Front Refl ector Install:
1. Position Refl ector (17) so it is near
the Stem (A) and points straight
forward (fi g 12).
2. Tighten Clamp Screw.
NOTE: Do not over-tighten. This will
damage the Clamp.
Make sure Refl ector view is not ob-
structed.
Rear Refl ector Install (various mod-
els):
1. Position Refl ector (18) so it points
straight backwards and is not above
the seat post limit (A) (fi g 13).
2. Tighten Clamp Screw.
NOTE: Do not over-tighten. This will
damage the Clamp.
Make sure Refl ector view is not ob-
structed.
40
20
17
A
Dual Rear Refl ectors (various models):
The Rear Refl ectors (40) are pre-installed
on the bike. Make sure they are secure,
not bent and are pointing straight back-
wards.
A
fig 12
18
fig 13