Pedal Installation - Huffy Multi-Speed Comfort Bicycles Owner's Manual

Pedal Installation

CAUTION: The right pedal is marked "R" and the left pedal is marked "L".
• The pedal marked "R" has right-hand threads. Tighten it in a clockwise direction.
• The pedal marked "L" has left-hand threads. Tighten it in a counterclockwise
direction (anti-clockwise).
• Turn the right pedal marked "R" into the right side of the crank arm, and the left
pedal marked "L" into the left side of the crank arm.
Tighten the pedals (fi g 14):
• Make sure the threads of each pedal are fully into the crank arm.
NOTE: The recommended torque (tightness) for each pedal is 30 ft.-lbs.
WARNING: Ensure pedals
are secure in crank arms so they will
not loosen. Periodically check tight-
ness.
Note: A Pedal Wrench is preferred for attaching Pedals. An open-end
wrench can also be used as shown.
L
R
fig 14
21