Verizon MBR1515L User Manual page 93

- Connection Mode. This setting specifies when the router should establish the
PPPoE connection. Currently the connection mode is always on in order to
provide a steady IPv6 connection. The router never disconnects the connection,
and in case the connection is broken (for example, the cable or DSL modem is
turned off somehow), the router brings up the connection right after the PPPoE
connection is available.
- Router's IPv6 Address on WAN. This value shows the IPv6 address acquired for
the router's WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address.
- Router's IPv6 Address on LAN. This value shows the IPv6 address acquired for
the router's LAN interface. The number after the slash (/) is the length of the
prefix, which is also roughly indicated by the underline (_) under the IPv6 address.
- IP Address Assignment. You can select how you want to assign IPv6 addresses
to the devices on the LAN (for example, your home network). You can select
either the Use DHCP Server or Auto Config option to assign IPv6 addresses.
Using a DHCP server might pass more information to LAN devices, but some
IPv6 systems might not support the DHCv6 client function. Auto Config is selected
by default.
- Use This Interface ID. You can enable this option and specify the interface ID you
want for the IPv6 address for the router's LAN interface. If you do not specify an
ID here, the router generates one automatically from its MAC address.
• Fixed. If your ISP indicates that your IPv6 connection is Fixed IP, select Fixed.
Enter the requested information:
- Fixed. The fixed IPv6 connection is rarely used. If you need this type of
connection, your ISP provides you with the IPv6 address configurations.
Verizon 4G LTE Router MBR1515LVW
Advanced
93