Table of Contents
Advertisement
2.
Log in to the router and select Wi-Fi Settings (see
Settings
on page 32).
3.
Make the following changes:
•
Change the wireless network name (SSID) to a meaningful name.
•
On the WPA/PSK + WPA2/PSK screen, select a passphrase.
•
Make sure that the Keep Existing Wi-Fi Settings check box is selected in the
Advanced Wi-Fi Settings screen so that your new settings are not erased if you use
WPS.
4.
Click Apply so that your changes take effect. Write down your settings.
All existing wireless clients are disassociated and disconnected from the router.
5.
For the non-WPS devices that you want to connect, open the networking utility and follow
the utility's instructions to enter the security settings that you selected in Step 3 (the SSID,
WPA/PSK + WPA2/PSK security method, and passphrase).
6.
For the WPS devices that you want to connect, follow the procedure
page 37 or
WPS PIN Entry
The settings that you configured in Step 3 are broadcast to the WPS devices so that they
can connect to the router.
Verizon 4G LTE Router MBR1515LVW
on page 38.
Wi-Fi Settings
40
Manually Configure Your Wireless
WPS Button
on
Advertisement
Table of Contents
