Verizon MBR1515L User Manual page 90

Note: The 6to4 tunnel connection needs the IPv4 Internet connection to be
up first.
In the LAN Setup section, enter the requested information:
- Router's IPv6 Address on LAN. This value shows the IPv6 address acquired for
the router's LAN interface. The number after the slash (/) is the length of the
prefix, which is also indicated by the underline (_) under the IPv6 address.
- IP Address Assignment. You can select how you want to assign IPv6 addresses
to the devices on the LAN (for example, your home network). You can select
either the Use DHCP Server or Auto Config option to assign IPv6 addresses.
Using a DHCP server might pass more information to LAN devices, but some IPv6
systems might not support the DHCv6 client function. Auto Config is selected by
default.
- Use This Interface ID. You can enable this option and specify the interface ID you
want for the IPv6 address for the router's LAN interface. If you do not specify an
ID here, the router generates one automatically from its MAC address.
• Auto Detect. If you are not clear about the IPv6 connection, select Auto Detect, and
let the router decide the correct type for you.
Enter the requested information:
- Connection Type. This value indicates the connection type detected.
- Router's IPv6 Address on WAN. This value shows the IPv6 address acquired for
the router's WAN (or Internet) interface. The number after the slash (/) is the
length of the prefix, which is also indicated by the underline (_) under the IPv6
address.
Verizon 4G LTE Router MBR1515LVW
Advanced
90