2.
From the main menu, select Advanced > Static Routes.
3.
Select the radio button of the static route you want to configure.
4.
Click Add or Edit to display the following screen:
5.
Fill in or change the fields:
•
Route Name. The route name is for identification purposes only.
•
Private. Select this check box if you want to limit access to the LAN only. The static
route is not reported in RIP.
•
Active. Select this check box to make this route effective.
•
Destination IP Address and IP Subnet Mask. If the destination is a single host, type
a subnet value of 255.255.255.255.
•
Gateway IP Address. This value must be a router on the same LAN segment as the
router.
•
Metric. Type a number from 2 through 15. This range represents the number of
routers between your network and the destination. Usually, a setting of 2 or 3 works,
but if this connection is a direct connection, set it to 2.
6.
Click Apply to save your changes. If you added a static route, it is added to the Static
Routes screen.
Verizon 4G LTE Router MBR1515LVW
Advanced
85