Intro Operation Customer Warranty - Cobra Marine MR F75 EU Owner's Manual

Getting Started
Operating Your Radio
Intro Operation Customer Warranty
Assistance
2. Turn the Squelch knob clockwise until the hissing
Turn Till Hissing
Sound Stops
sound stops.
Turning the Squelch knob further clockwise (higher bearier) will
filter weak and medium strength signals until only the strongest
Customer
Installation
Assistance
signal can get through at the highest squelch setting.
Secondary Icons
To receive weaker signals:
Lower Bearier
1. Turn the Squelch knob anticlockwise (lower bearier.)
If the squelch is set so that you can hear a continuous hissing
sound, the memory scan and tri-watch functions will be blocked.
Notice Caution Warning
Standby and Receive
Standby mode is the usual mode for the radio whenever it is turned on.
From Standby mode, you can:
Standby Mode
Change your radio's settings using set-up routines.
Receive messages on the current channel as well
as DSC messages.
Switch to Transmit mode using the Talk button.
Up/Down Buttons
While the radio is in Standby mode, the Receive mode is
entered whenever a strong enough signal to break squelch is
sent to the radio. You will hear the message through whichever
speakers are connected to the radio.
To change the channel you are listening to,
you can choose one of the following:
a. Press the Up/Down buttons. This will take you to
Channel 16 Button
the next higher or lower VHF channel. For rapid
advance, press and hold the Up or Down button.
b. Press the Channel 16 button. This will take
you directly to Channel 16.
Position Information:
If a GPS is connected, its position data will be displayed at
the position coordinates portion of the LCD. If a GPS is not
Position Entry Screen
connected, either the last available input or zeros will be
displayed as the position coordinates.
After 4 hours of operation with no position input, the
position entry screen will request a manual position entry.
Use the Up/Down and Call/Set buttons to enter the position
of your vessel. If no entry is made within 19
the position entry screen appears, nines will be displayed
as the default position coordinates.
34 English
Operating Your Radio
Set-Up Routines
Settings Menu
The Settings menu in the CobraMarine
many of its features, to adjust other features to suit your preferences and to enter
your user MMSI number.
Secondary Icons
Call/Set Button
Settings Menu
Up/Down Buttons
Exit
1 ⁄ hours after
2
Set-Up Routines
Intro Operation Customer Warranty
Assistance
™ VHF radio allows you to turn on and off
Customer
Installation
Assistance
To enter the Settings menu:
1. Press and hold the Call/Set button.
The Settings menu will appear on the LCD.
After entering the Settings menu, you can scroll
Notice Caution Warning
through it to make as many entries as you like.
Main Icons
Whenever the setting selection arrow appears in
a feature portion of the menu, it will point to the
setting that was in effect when you entered the menu.
When you are finished with changes, you can exit
the Settings menu and return to Standby mode.
Intro Operation Customer Warranty
Assistance
To exit the Settings menu:
1. Use the Up/Down buttons to scroll down to
at the bottom of the menu.
EXIT
Customer
Installation
Assistance
2. With the arrow pointing to
Secondary Icons button to return the radio to Standby mode.
NOTE
Basic set-up routines are described here. For set-up
Notice Caution Warning
routines that apply specifically to a particular function,
they are included in the section for that function.
•
, press the Call/Set
EXIT
Nothing comes close to a Cobra ® 35