Cobra Marine MR F75 EU Owner's Manual page 33

DSC Operation
Operating Your Radio
Intro Operation Customer Warranty
Assistance
c. If the station you called chose not to reply:
Resend the Request
NO REPLY
You will have two choices:
Customer
Installation
RESEND
Assistance
EXIT
Secondary Icons
a. To resend your position request:
1) Use the Up/Down buttons to scroll to
2) Press the Call/Set button.
Notice Caution Warning
b. To exit the Position Request mode:
1) Use the Up/Down buttons to scroll to
2) Press the Call/Set button to return to the
Individual Directory menu.
3) Use the Up/Down buttons to scroll to
4) Press the Call/Set button to return to the
Call Send menu.
5) Use the Up/Down buttons to scroll to
6) Press the Call/Set button to return to
Standby mode.
60 English
will show on your screen.
the request.
the Position Request mode.
RESEND
.
EXIT
.
EXIT
.
EXIT
Operating Your Radio
Intro Operation
Receiving a Position Request
When you went through the DSC set-up process, you set a position request reply
type. (See page 49 to change your setting.) Depending on the setting you chose,
when a Position Request message is received, your radio will enter either:
Installation
The Auto Reply mode.
Secondary Icons
The Manual Reply mode.
. Position Request
Position Request
Reply/Exit
DSC Operation
Customer Warranty
Assistance
Customer
Assistance
When the radio is in Auto Reply mode:
A position request will sound the position request
alarm and show the name of the requesting station
Notice Caution Warning
on the LCD. Your radio will automatically respond.
It will send your position, if you have a GPS connected
to your radio, or
NO POS. DATA
if you do not have a GPS device connected.
1. Press any button to silence the alarm and
exit the display.
When the radio is in the Manual Reply mode:
A position request message will sound the position
request alarm and show the name of the requesting
station. You can choose to:
Reply and send your position.
Exit without sending your position.
a. If you choose to reply with your position:
1) Use the Up/Down buttons to select
2) Press the Call/Set button to send your position.
3) Press any button to return to Standby mode.
b. If you choose not to reply:
1) Use the Up/Down buttons to select
2) Press the Call/Set button to return to
Standby mode without sending your position.
Nothing comes close to a Cobra
(no position data),
.
REPLY
.
EXIT
® 61