Cobra Marine MR F75 EU Owner's Manual page 32

DSC Operation
Operating Your Radio
Intro Operation Customer Warranty
Receiving a Group Call Assistance
When another station makes a Group call to your radio, the individual alarm
will sound, the caller will be identified on the LCD and your radio will be
switched to the channel selected by the caller, just as for an individual call.
Customer
Installation
Press any button to turn off the alarm. Assistance
Secondary Icons
To receive a group call:
Caller Identified
1. Listen for the group voice message.
2. Press the Talk button and respond
only if appropriate.
Notice Caution Warning
Sending a Position Request
Position Request mode enables a DSC radio to obtain the position
(latitude and longitude) of a station that has a GPS device connected
to the DSC radio at that station.
To request the position of another station:
Standby Mode
1. In Standby mode, select a channel on which
you want to communicate.
2. Press the Call/Set button to enter the
Call Send menu.
Position Request 3. Use the Up/Down buttons to scroll to
POSREQST
the menu.
4. Press the Call/Set button to enter the
Individual Directory menu.
Individual Directory
5. Use the Up/Down buttons to scroll to the
name of the station whose position you
want to request.
58 English
(position request) on
DSC Operation
Operating Your Radio
Intro Operation Customer Warranty
Assistance
6. Press the Call/Set button.
Position Request
Your radio will send the position request and
there will be one of three possible responses:
You will receive the position.
Customer
Installation
Assistance
You will receive a no position data response,
Secondary Icons
meaning the station you queried is not connected
to a GPS device and cannot send its position.
You will receive a no reply response, meaning the
operator of that station has chosen not to reply
Notice Caution Warning
to your request.
Choose one of the following:
a. If you receive a position:
Receiving a Position
The requested position with the station name
and MMSI will show on your screen.
1) Press the Call/Set button to return to Standby
mode after you have noted the station's position.
b. If the station you called cannot send its position:
NO POS. DATA
No Position Data
on your screen.
1) Press the Call/Set button to return to the
Individual Directory menu.
2) Use the Up/Down buttons to scroll to
3) Press the Call/Set button to return to the
Call Send menu.
4) Use the Up/Down buttons to scroll to
5) Press the Call/Set button to return to
Standby mode.
(no position data) will show
.
EXIT
.
EXIT
Nothing comes close to a Cobra ® 59