Cobra Marine MR F75 EU Owner's Manual page 26

DSC Set-Up
Operating Your Radio
Intro Operation Customer Warranty
To enter your MMSI number: Assistance
User MMSI
Main Icons
1. Enter the Settings menu and scroll to
with the Up/Down buttons.
2. Press the Call/Set button and the blinking cursor will
Customer
Installation
Assistance
appear at the first digit under
Secondary Icons
User MMSI ID Entry
3. Use the Up/Down buttons to scroll through the number
Intro Operation Customer
Assistance
list to that digit of your number.
4. Press the Call/Set button to select the digit and the
blinking cursor will move to the next digit of the number.
Customer
Notice Caution Warning
Installation
Assistance
5. Repeat steps 3 and 4 until all nine digits of your MMSI
number are entered.
Secondary Icons
NOTE
Press the High/Low Power button to backspace
Notice Caution
and erase the last selected number.
6. Check that you have entered the number correctly.
7. Press the Call/Set button.
8. Repeat steps 3 through 6 to verify the number by
re-entering it.
9. Press and hold the Call/Set button to accept the
number and return to the Settings menu.
46 English
USERMMSI
USER MMSI ID ENTRY
Warranty
Warning
Operating Your Radio
Intro Operation
If You Incorrectly Enter Your MMSI Number
Error Message
Installation
.
Secondary Icons
Call/Set Button
Notice
If You Transfer Your Radio to a Different Vessel
Contact the MMSI issuing agency from which you obtained your number
and change the information associated with your number to correspond
to vessel in which it will be mounted.
User MMSI
User MMSI ID Entry
DSC Set-Up
Customer Warranty
Assistance
You CANNOT re-enter your number. A second attempt to enter
an MMSI number will result in an error message as shown.
Pressing the Call/Set button from the error message will
Customer
Assistance
return the radio to the Settings menu.
Once the error message appears, the radio will still operate
in all non-DSC modes. But you will have to return the radio
to your local dealer for reset before you can enter your
MMSI number to use the radio in DSC mode.
Caution Warning
Because the MMSI number is so important to DSC
operation, this limitation is imposed on all DSC capable
radios to prevent constant changes and the potential
introduction of errors in the process. If, for any reason,
it is necessary to change the MMSI number in the radio,
you can return it to your local dealer for reset.
To view your MMSI number at any time:
1. Enter the Settings menu and scroll to
with the Up/Down buttons.
USERMMSI
2. Press the Call/Set button and the blinking
cursor will appear at the first digit of your
already entered number under
USERMMSI
.
ID ENTRY
3. Press and hold the Call/Set button to
return to the Settings menu.
Nothing comes close to a Cobra ® 47