Table of Contents
Advertisement
DJ Bank Service Maintenance Guide
Symptom(s)
1 or more LED's are not
illuminating
Breaker/Fuse keeps blowing
Device has no power
If you still have a problem after trying the above solutions, please contact CHAUVET Technical
Support at the location below.
Technical Support
Address: Service Dept.
3000 N 29th Ct, Hollywood, FL 33020 (U.S.A.)
Support (Email): tech@chauvetlighting.com
Telephone: (954) 929-1115 - (Press 4)
Fax: (954) 929-5560 - (Attention: Service)
Website:
Contact Us
World Wide
General Information
World Wide Web
DJ Bank™ User Manual
Clean the fixture regularly to avoid any such failure. This fixture is convection
cooled, which means that if the surface is kept clean and free of debris, then
proper cooling will be allowed to occur
An LED may have failed, resulting in an open circuit. In this event, all of the red,
green, or blue in a single module may no longer illuminate. This does not mean
that all of the LEDs have failed, but the circuit may be wired in series.
An LED may have failed, resulting in a short circuit. In this event, only the single
LED which has failed will no longer function.
-Note: In the event of LED failure, a replacement LED PCB assembly may be
purchased directly from Chauvet
Check total load placed on the electrical circuit
Check for a short in the electrical wiring: internal and/or external
Check device's fuse (internal)
Check for power on Mains
http://www.chauvetlighting.com
Chauvet Lighting
3000 North 29
Hollywood, FL 33020
voice: 954.929.1115
fax:
954.929.5560
toll free:
800.762.1084)
www.chauvetlighting.com
Possible Solution(s)
th
Court
7
Part#: P222-DJBANK
1/30/2009 10:45 AM
Advertisement
Table of Contents
