Hardware Hookup - Crestron Isys TPS-6000L Operation Manual

15 inch lectern touchpanel
Hide thumbs Also See for Isys TPS-6000L:
Table of Contents

Advertisement

Crestron Isys™ TPS-6000L
Operations Guide - DOC. 5825
The required wire gauge should be chosen such that the resistance value is less than
the value calculated in the resistance equation. Refer to the table after this paragraph.
Wire Gauge Values
RESISTANCE (R)
4
6
10
15
13
8.7
NOTE: All network wiring must consist of two twisted-pairs. One twisted pair is
the +24V conductor and the GND conductor and the other twisted pair is the Y
conductor and the Z conductor.
NOTE: When daisy-chaining Cresnet units, strip the ends of the wires carefully to
avoid nicking the conductors. Twist together the ends of the wires that share a pin on
the network connector, and tin the twisted connection. Apply solder only to the ends
of the twisted wires. Avoid tinning too far up the wires or the end becomes brittle.
Insert the tinned connection into the Cresnet connector and tighten the retaining
screw. Repeat the procedure for the other three conductors.

Hardware Hookup

The TPS-6000L touchpanel installs simply and cleanly into existing or newly
constructed walls, with back box and drywall mounting options.
Back Box Mounting
Back box mounting is typically used at new construction sites. The optional back
box, BB-6000, includes the necessary hardware, brackets and electrical box, which
provides a secure enclosure that, can be fastened directly to a stud. The details for
this optional mounting method are provided in the latest revision of the BB-6000
Installation Guide (Doc. 5826). After completing the steps in the installation guide,
simply mate the four posts of the bezel with the holes drilled into the mounting
surface and firmly press the bezel over the touchpanel.
NOTE: The mounting hardware and accessories supplied with the TPS-6000L are
not required for the back box mounting option.
Direct Mounting
The TPS-6000L is a low-voltage unit that can be installed directly into a mounting
surface. Each touchpanel is provided with mounting hardware and accessories, as
shown in the table after this paragraph.
15 Inch Lectern Touchpanel: Crestron Isys™ TPS-6000L • 7
15 Inch Lectern Touchpanel
WIRE GAUGE
16
18
20
22
Doubled CAT5
Tripled CAT5

Advertisement

Table of Contents
loading

Table of Contents