Selecting Wireless Network Settings In Windows; Selecting Wireless Network Settings In Mac Os X; Enabling Wpa Or Eap Security - Epson 1410Wi User Manual

9. Select a WPA or EAP setting from the drop-down menu.
10. Select the settings on the security menu as necessary for your network.
11. When you finish selecting settings, select Setup complete and follow the on-screen instructions to
save your settings and exit the menus.
Parent topic:

Selecting Wireless Network Settings in Windows

Before connecting to the projector, select the correct wireless network on your computer.
1. To access your wireless utility software, double-click the network icon on the Windows taskbar.
2. Do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the SSID you assigned to the projector.
3. Click Connect.
Parent topic:

Selecting Wireless Network Settings in Mac OS X

Before connecting to the projector, select the correct wireless network in Mac OS X.
1. Click the AirPort icon on the menu bar at the top of the screen.
2. Make sure AirPort is turned on, then do one of the following:
• If your projector is set up on an existing network (Advanced mode), select the network name
(SSID).
• If your projector is configured for Quick mode, select the SSID you assigned to the projector.
Parent topic:

Enabling WPA or EAP Security

Set up the WPA or EAP security settings to match your network's settings. Check with your network
administrator for guidance on entering the correct information.
Wireless Network Projection
Wireless Network Projection
Wireless Network Projection
72