Calibrating Automatically - Epson 1410Wi User Manual

2. Do the following to use the pen as a mouse:
• To left-click, tap the board.
• To double-click, tap twice.
• To right-click, press the board with the pen for about 3 seconds.
• To click and drag, tap and drag with the pen.
• To move the cursor, hover over the board without touching it.
Note: If you do not want to use the hovering feature, you can turn it off using the Easy Interactive
Function in the projector's Extended menu.
3. When you are finished using the pen, slide the power switch to turn it off.

Calibrating Automatically

Calibrating Manually
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Related tasks
Replacing the Pen Batteries
Calibrating Automatically
Calibration coordinates the positioning of the pen with the location of your cursor. You only need to
calibrate the first time you use your projector, and you do not need the pens or a computer for
calibration. You should not need to calibrate again unless the projector or image is moved, or the image
is resized.
Using the Interactive Pens
131