Connecting A Computer To The Control Pad - Epson 1410Wi User Manual

2. Connect the other end to the Audio port that corresponds to the Computer port you are using.
Parent topic: Connecting to Computer Sources

Connecting a Computer to the Control Pad

If your computer meets the system requirements, you can send video and audio output to the projector
through the control pad's USB-B port (preferably USB 2.0). Connect the projector and your computer to
the control pad using USB cables.
Caution: Make sure the control pad is positioned no more than 6.5 ft (2 m) away from the projector, and
no obstacles are blocking the signal from the projector. Do not place the control pad behind the
projection surface.
Note: This also lets you use the interactive pens with your computer. You need to adjust the USB Type
B setting in the projector's Extended menu before you can project through the USB port. Note that using
USB Display will slow interactive pen function. For the best performance, VGA, HDMI, or DisplayPort
connections are recommended, in addition to the USB connection for interactive pen usage.
1. Turn on your computer.
2. Make sure a USB cable is connected between the USB-B port on the projector and the USB-A port
on the control pad.
41