Solutions When Wireless Authentication Fails; Solutions When You Cannot Access The Projector Through The Web; Solutions When Network Alert E-Mails Are Not Received - Epson 1410Wi User Manual

Parent topic:

Solutions When Wireless Authentication Fails

If the wireless settings are correct, but authentication fails, you may need to update the Time/Schedule
Settings on the Extended menu.
Parent topic:
Related references
Projector Setup Settings - Extended Menu

Solutions When You Cannot Access the Projector Through the Web

If you are unable to access the projector through a web browser, make sure you are using the correct ID
and password, which are case sensitive.
• For the user ID, enter EPSONWEB. (You cannot change the user ID.)
• For the password, enter the password set in the projector's Network menu. The default password is
admin.
• Make sure you have access to the network the projector is on.
Parent topic:

Solutions When Network Alert E-Mails are Not Received

If you do not receive an e-mail alerting you to problems with a projector over the network, try the
following solutions:
• Make sure the projector is turned on and connected to the network correctly. (If an error shut down the
projector, it cannot send an e-mail.)
• Make sure you set up the projector e-mail alert settings correctly on the projector's network Mail menu
or in the network software.
• Set the Standby Mode setting to Network Standby so the network software can monitor the projector
in standby mode.
Parent topic:
Related references
Projector Setup Settings - Extended Menu
Related tasks
Setting Up Projector Network E-Mail Alerts
Solving Problems
Solving Network Problems
Solving Network Problems
Solving Network Problems
235