Rj-11 Jack Cable - HP ProBook 6475b Maintenance And Service Manual

3. Remove the speaker assembly (2) from the base enclosure.
Reverse this procedure to install the speaker assembly.

RJ-11 jack cable

NOTE: The RJ-11 jack cable is included in the Cable Kit, spare part number 641830-001.
Before removing the RJ-11 jack cable, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the battery (see
a. Service cover (see
b. Optical drive (see
c. Hard drive (see
d. Modem module (see
e. Keyboard (see
f. Base enclosure (see
98 Chapter 4 Removal and replacement procedures
Battery on page 68), and then remove the following components:
Service cover on page
Optical drive on page
Hard drive on page 74)
Modem module on page
Keyboard on page 88)
Base enclosure on page
70)
71)
85)
93)