Rj-11 Jack Cable - HP ProBook 6560b Maintenance And Service Manual

RJ-11 jack cable

NOTE: The RJ-11 jack cable is included in the Cable Kit, spare part number 646968-001 for use in
6560b models, 641188-001 for use in 8560p models.
Before removing the RJ-11 jack cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
5.
Remove the following components:
a.
Bottom door (see
b.
Hard drive (see
c.
Optical drive (see
d. WLAN module (see
e. WWAN module (see
f. Modem module (see
g. Fan (see
h.
Heat sink (see
i.
Keyboard (see
j.
Bottom cover (see
Remove the RJ-11 jack cable:
1.
Position the bottom cover with the front toward you.
2. Remove the RJ-11 jack (1) from the clip built into the base enclosure.
Battery on page
Bottom door on page
Hard drive on page
Optical drive on page
WLAN module on page
WWAN module on page
Modem module on page
Fan on page 87)
Heat sink on page
Keyboard on page
Bottom cover on page
60).
66).
71)
67)
78)
76)
85)
89)
95)
97)
Component replacement procedures
103