Rj-11 Jack Cable - HP EliteBook 8560p Maintenance And Service Manual

RJ-11 jack cable

NOTE:
6560b models, 641188-001 for use in 8560p models.
Before removing the RJ-11 jack cable, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet,
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
5. Remove the following components:
a.
b.
c.
d.
e.
f.
g.
h.
i.
j.
Remove the RJ-11 jack cable:
1. Position the bottom cover with the front toward you.
2. Remove the RJ-11 jack (1) from the clip built into the bottom cover.
Downloaded from LpManual.com Manuals
The RJ-11 jack cable is included in the Cable Kit, spare part number 646968-001 for use in
Battery on page
Bottom door (see Bottom door on page
Hard drive (see Hard drive on page
Optical drive (see Optical drive on page
WLAN module (see WLAN module on page
WWAN module (see WWAN module on page
Modem module (see Modem module on page
Fan (see Fan on page 85)
Heat sink (see Heat sink on page
Keyboard (see Keyboard on page
Bottom cover (see Bottom cover on page
58).
64).
69)
65)
76)
74)
83)
86)
92)
94)
Component replacement procedures 101