Lamp - Chauvet Legend 1200E SPOT User Manual

Setup

Lamp

When replacing the lamp, please wait at least 15 minutes after powering down
to allow the unit to cool! More time may be necessary.
Always disconnect from main power prior to lamp replacement.
Do not touch the envelope (glass area) of the bulb with bare hands. If this
happens, clean the lamp with isopropyl alcohol and wipe it with a lint free
cloth before installation.
You should use cotton or latex gloves to avoid from touching the lamp
envelope with your bare hands.
Lamp cover
¼ - turn screws
Lamp alignment screws
Lamp
Legend™ 1200E Spot User Manual 13 8/13/2009 10:57 AM