Icons; Safety Instructions - Chauvet Legend 1200E SPOT User Manual

Introduction

Icons

Safety
Instructions
Legend™ 1200E Spot User Manual
CHAUVET manuals use the following icons to indicate information that requires
special attention on the part of the user.
M
I
EANING
CONS
This paragraph contains critical installation, configuration
or operation information. Failure to comply with this
information may render the fixture partially or completely
inoperative, cause damage to the fixture or cause harm to
the user.
This
configuration information. Failure to comply with this
information may prevent the fixture from functioning
correctly.
This paragraph reminds you of useful, although not
critical, information.
Please read the following instructions carefully because they include important
safety information about the installation, usage, and maintenance of this product.
There are no user serviceable parts inside the unit. Any reference to unit
servicing you may find from now on in this User Manual will only apply to
properly CHAUVET certified technicians. Do not open the housing or attempt
any repairs unless you are one of them.
In the event that your unit may require service, please contact CHAUVET at
(954) 923-3680.
Keep this manual for future consultation. If you sell the fixture to another user,
make sure that they also receive this manual.
Always make sure that you are connecting the fixture to the proper voltage, as
per the specifications in this manual or on the fixture.
Always disconnect the fixture from the power source before servicing.
This product is for indoor use only! To prevent risk of fire or shock, do not
expose fixture to rain or moisture.
Make sure there are no flammable materials close to the fixture while operating.
Always secure the fixture to a fastening device using a safety chain.
Maximum ambient temperature (Ta) is 104° F (40° C). Do not operate the fixture
at a higher temperature.
In the event of a serious operating problem, stop using the fixture immediately!
Never connect this fixture to a dimmer pack.
Make sure the power cord is not crimped or damaged.
Never disconnect the power cord by pulling or tugging on the cord.
Avoid direct eye exposure to the light source while it is on.
Please refer to all applicable local codes and regulations for proper
installation of this fixture.
2
paragraph contains important installation or
8/13/2009 10:57 AM