Receiving A Dsc Position Report Call - Standard Horizon Eclipse DSC+ GX1100S Owner's Manual

procedure until all nine spaces of the MMSI num-
ber which you want to contact are entered.
6. If a mistake was made entering in the MMSI num-
ber repeat pressing the microphone's [ H/L ] key until
the wrong nunber is selected, then move the chan-
nel knob to correct the entry.
7. When finished entering the MMSI number, press
and hold the [ ENT ] key.
8. Press the [ ENT ] key to send your position to the
selected vessel.
9. Press the [ CLR ( WX )] key to return the display to
the radio operation mode display.

11.9.3 Receiving a DSC Position Report Call

When another vessel transmits their location to the GX1100S the following will
happen:
1. When the Position Report Call is received, a ring-
ing sound will be produced and the display shows
received data. The GX1100S will also output NMEA
sentences (DSC and DSE) to a connected GPS
Chart Plotter.
2. Press any key to stop ringing.
3. Press the [ ( UP )] / [ ( DOWN )] keys to change
the display to view the received data.
4. Press the [ CLR ( WX )] key to return the display to
the radio operation mode display.
Page 54 GX1100S