Transmitting A Position Request To Another Vessel - Standard Horizon Eclipse DSC+ GX1100S Owner's Manual

The GX1100S has the capability to turn off the Position Request ringer.
1. Press and hold down the [ CALL ( MENU )]
key until "SETUP MENU SETUP MENU" appears.
SETUP MENU SETUP MENU
SETUP MENU
2. Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect "DSC SETUP DSC SETUP" menu.
DSC SETUP DSC SETUP DSC SETUP
3. Press the [ ENT ] key, then select "DSC BEEP
with the [ ( UP )] / [ ( DOWN )] keys.
4. Press the [ ENT ] key.
5. Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect "POS REQUEST
POS REQUEST POS REQUEST
POS REQUEST". POS REQUEST
6. Press the [ ENT ] key.
7. Press the [
select "OFF
OFF". OFF OFF
OFF
8. Press the [ ENT ] key to store the selected
setting.
9. To exit this menu and return to radio operation
mode press the [ 16/9 ] key.
If you wish to return to enabling the ringer tone, just repeat the above proce-
dure, pressing the [ ( UP )] / [ ( DOWN )] keys to select "ON

11.8.2 Transmitting a Position Request to Another Vessel

Pre-Programmable Request
1. Press the [ CALL ( MENU )] key. The "DSC
MENU" will appear in the display.
MENU MENU
MENU MENU
2. Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect "POS REQUEST
POS REQUEST POS REQUEST POS REQUEST POS REQUEST".
3. Press [ ENT ] key to show the Position request di-
rectory. This directory uses the INDIVIDUAL Di-
rectory information.
4. Press the [ ( UP )] / [ ( DOWN )] keys to se-
lect a name, then press the [ ENT ] key.
5. Press the [ ENT ] key to transmit the position
request DSC call.
6. When the GX1100S receives the position
from the polled vessel, the GX1100S will
produce a ringing alarm sound and the po-
sition from the polled vessel transferred to
the GPS Chart plotter.
7. Press any key to stop the alarm.
GX1100S
( UP )] / [ ( DOWN )] keys to
DSC BEEP" DSC BEEP DSC BEEP DSC BEEP
DSC DSC DSC
DSC
ON" in step "7" above.
ON ON
ON
Page 49