True Induction Double Burner User Manual
  1. Manuals
  2. Brands
  3. True Induction Manuals
  4. Cooktop
  5. Double Burner
  6. User manual

True Induction Double Burner User Manual

Double burner counter inset
Hide thumbs
Table of Contents

Advertisement

Quick Links

DOUBLE BURNER COUNTER INSET
User Guide

Advertisement

Table of Contents
loading

Related Manuals for True Induction Double Burner

Summary of Contents for True Induction Double Burner

  • Page 1 DOUBLE BURNER COUNTER INSET User Guide...

  • Page 2: Table Of Contents

    VI. Cleaning and Maintenance VII. Troubleshooting Error Codes Thank you for purchasing the True Induction double burner counter inset unit. Please read the entire instruction manual prior to using your unit. If you have any questions regarding the True Induction Cooktop, please visit TrueInduction.com...

  • Page 3: Dimensions/Placement (Cut-Out In Countertop)

    I. Dimensions and Placement for Cut-Out in Countertop Cut a rectangle hole in the countertop where the cooktop is to be placed. The dimensions for the cut-out are 14 1/4” x 23 11/16” The cut-out must be placed at least 2 1/2” from any side of the countertop.
  • Page 4 Building of Supports for Cooktop Below the Counter Any thickness of the countertop can be utilized, however, the thickness will determine if the supports are built into the walls of the cut-out, placed below the cut-out, or be built out from the bottom of the cut-out. Two support beams between ½”...

  • Page 5: Clearance Needed For Air Circulation

    Clearance Needed for Air Circulation: Below you will see a diagram of the airflow. Be sure not to block either the intake or exhaust. - For proper air circulation, allow at least 3” of clearance from the bottom of the induction cooker, to any shelving or stor- age.

  • Page 6: Important Safety Information

    II. Important Safety Information When using electrical appliances, basic safety precautions should always be followed. For the True Induction cooker, even with the built-in safety features, it is essential to heed all precautions. -When the unit is on, do not touch outside the control panel as the surface may contain residual heat.

  • Page 7: Specifications

    6, the other burner automatically reduces power to level 4, creating a total max 10 setting). If one side of the double burner is using HEAT function and the other side uses the TEMP settings, the maximum HEAT setting is “5”.

  • Page 8: Using The Temperature Setting

    You can also change the HEAT or TEMP settings without affecting the current timer setting. Built-in Safety Shut Off: The True Induction cooktop is designed to automatically shut off after 150 minutes of use. The built-in auto shut off is a safety feature.

  • Page 9: Compatible Cookware

    If your magnet stays on then your cookware is ready to be used on the True Induction single burner induction portable cooktop! Optimal cookware has a flat bottom and a diameter of 4.5” to 10”. Round, flat bottom pans give the best results. Pans with warped or curved bottoms will not heat evenly.

  • Page 10: Troubleshooting Error Codes

    Troubleshooting Error Codes If the display shows an error code, please refer to this sheet for a potential solution. Error Code Cause and Potential Solution  Cookware is not compatible with the induction cooktop.  There is no cookware on the induction cooktop. “_ _ _”...

This manual is also suitable for:

S2f2

Table of Contents