Accessing The Setup Wizard After Installation; Manually Configuring Your Internet Settings - NETGEAR MBRN3000 User Manual

Mobile Broadband Wireless-N Router MBRN3000

Accessing the Setup Wizard After Installation

Log in to the router as described in
1.
Select Setup Wizard:
2.
Click Next.
3.
The Setup Wizard prompts you to set up your Internet connection and wireless network
as described in the Mobile Broadband Wireless-N Router MBRN3000 Installation Guide.

Manually Configuring Your Internet Settings

In order to connect to the network, and active broadband service account is required. Please
contact your ISP for user name, password and the network name.
To manually configure your Internet settings:
Log in to the router as described in
1.
Select Mobile Broadband Settings.
2.
Adjust the settings as needed based on your
3.
Internet connection. The fields in this screen are
described in Table
region and ISP, some fields might not be
available.
The following buttons are available:
4.
Connect: Manually connect to the
•
network.
Disconnect: Disconnect from the current
•
network.
Apply: Apply the changes that you made.
•
Cancel: Discard changes.
•
Refresh: Update the connection status.
•
"Logging In to Your Router"
"Logging In to Your Router"
2. Depending on your
on page 9.
on page 9.
Chapter 1: Connecting to the Internet | 11