NETGEAR MBRN3000 User Manual page 11

To log in to the router:
Type http://www.routerlogin.net in the address field of your browser, and then press
1.
Enter. A login window displays:
Enter admin for the user name and your password (or the default, password
2.
information about how to change the password, see
page 23.
If you changed your password and do not remember what it is, you
Note:
can restore the router to its factory settings. See
Settings "
If the router has not been configured, the Smart Wizard screen displays. After the router has
3.
been configured, the Firmware Upgrade assistant will appear.
Checking for Firmware Updates screen. After initial setup, this screen displays
•
unless you have cleared the Check for Updated Firmware Upon Log-in checkbox.
Router Status screen. The Router Status screen displays if the router's Internet
•
connection has not been set up yet. See
You can use different methods to configure your router.
4.
Select Setup Wizard from the router menu to set up your Internet connection and
•
wireless network configuration. See
on page 11.
You can manually configure the router settings. See
•
Internet Settings"
10 | Chapter 1: Connecting to the Internet
in Appendix A.
"Accessing the Setup Wizard After Installation"
on page 11.
Mobile Broadband Wireless-N Router MBRN3000
"Changing the Built-In Password"
"Factory Default
on page 33.
"Router Status"
"Manually Configuring Your
For
).
on