Model And Serial Number Information; Unpacking - Travis Industries 21E Owner's Manual

Table of Contents

Advertisement

4
If you have any questions regarding our products
If you have any questions regarding our products please
have the product model and serial numbers available upon
please have the model and serial number when
calling your Travis Industries, Inc. dealer. The catalogue/
calling your Travis Industries dealer. The model
model and serial numbers are located behind the glass and
number is located under the log set (see
under the Log Set (Figure 1).
"Unpacking" below and Figure 1).
For instructions on accessing the model and serial number
information, refer to the Unpacking instructions in the next
The serial number label below must be attached
section.
to the right side flange (see Figure 1). An
additional label is affixed to the right for future
reference.
The fireplace is packaged in such a way as to prevent
damage to the Front Glass and Log Set. This packaging
must be removed before operation.
1. Remove all exterior bags and packaging from the
fireplace.
2. Remove six (6) Phillips screws as shown in Figure 2 and
remove the Exhaust Vent Assembly.
Figure 2
Exhaust Vent Assembly
Screws to
remove (6)
© 2010 Travis Industries Inc.

Model and Serial Number Information

Unpacking

Figure 1
Model Number
3. Remove six (6) Phillips screws from the Glass Retainer
Bracket (Figure 3) and remove the bracket.
4. The Front Glass sits inside a shallow groove just above
the speakers. To remove the glass, lift it up and off the
groove (Figure 3). The corner protectors may be discarded.
Figure 3
Glass Retainer Bracket
Screws to
remove (6)
Front Glass
100-01183_000
Serial Number

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents