DirecTV HD Receiver User Manual page 109

1. SATELLITE IN (SWM-1) –
applicable, is made to this satellite in port.
2. COMPONENT VIDEO OUT–
RCA connectors below it for analog audio out.
3. RCA-Audio/Video Jacks –
red) to feed a VCR or DVD player/burner.
4. DIGITAL AUDIO OUT –
5. HDMI –
Use this combination digital video and audio connector for the best HD picture quality.
6. ETHERNET –
For future use. Not available on all models.
7. USB –
For future use. (USB 2.0 Host 5V = 500mA)
8. PHONE JACK –
Connect your phone line here to enable Pay Per View purchasing and Caller ID (if your phone service package
includes it).
9. POWER –
Your receiver must be plugged in at all times to function properly.
Connect one line from your satellite dish here. A Single Wire Multi-Switch (SWM) connection, if
Use this block to connect up HD component video cables (green, blue, red) and use the white and red
A Standard-Definition (SD) output. You can use the entire row of RCA connectors (yellow, white and
Use this digital audio connection for sound. Not available on all models.
Appendix 1: Receivers Front and Back Panels
109