Engine
Removal
NOTE: All service to the engine must be
performed by an authorized Honda dealer.
1. Remove Pinion Assembly/Clutch Arma-
ture/Clamp and Clutch Housing.
2. Disconnect all necessary wiring.
ti13703a
3. Remove two locknuts (17) and screws (16) from
base of engine.
16
17
4. Lift engine carefully and place on work bench.
313889E
ti13716a
Installation
1. Lift engine carefully and place on sprayer cart.
2. Install two screws (16) in base of engine and secure
with locknuts (17). Torque to 26 ft-lb (22.6 N•m).
16
17
3. Connect all necessary wiring.
4. Install Pinion Assembly/Clutch Armature/Clamp
and Clutch Housing.
ti13716a
ti13703a
Engine
19