Pop3 - Xerox Phaser 7100 System Administrator Manual

Network Configuration

POP3

Post Office Protocol, version 3 (POP3) allows email clients to retrieve email from remote servers over
TCP/IP on network port 110.
In CentreWare Internet Services, click Properties > Connectivity > Protocols > POP3 Setup.
1.
2. Type the appropriately formatted address and port number. The default port number is 110.
Select APOP Authentication next to POP Receive Password Encryption.
3.
4. Type the Login Name assigned to the printer that will be used to log in to the POP3 server.
5. Type a password. Retype the password to confirm.
6. Type the number of minutes between 1 and 120 for Polling Interval. The default value is
10 minutes.
7. Click Apply.
34 Phaser 7100 Color Printer
System Administrator Guide