Xerox Phaser 6600 User Giude page 89

4. Flex the sheets back and forth and fan them, then align the edges of the stack on a level surface.
This procedure separates any sheets that are stuck together and reduces the possibility of jams.
Note: To avoid jams and misfeeds, do not remove paper from its packaging until you are ready
to use it.
5. Load the paper in the tray. Load hole punched paper with the holes to the left.
•
For 1-sided printing, load letterhead or pre-printed face up with the top edge going into the
printer.
•
For 2-sided printing, load letterhead and pre-printed face down with the top edge going into
the printer.
Note: Do not load paper above the maximum fill line. Overfilling the tray can cause the printer to
jam.
Paper and Media
Phaser 6600 Color Printer
User Guide
89