Xerox Phaser 6600 User Giude page 164

Troubleshooting
Symptom
White lines or streaks running
through only one color.
White line or lines running
through all colors.
Slanted printing.
Colors are blurry or there is
white area around objects.
Blotchy or mottled images.
164 Phaser 6600 Color Printer
User Guide
Probable Causes
Something is blocking the lens
for the affected color.
Paper or debris is dragging the
bottom of the transfer belt.
The paper guides in the trays
are not set correctly.
Color-to-color alignment is not
correct.
The paper is too light or too
thin.
The paper is damp.
The humidity is too high.
Solutions
Clean the lens for the affected color.
• Remove the paper or debris from the
printer.
• For assistance, go to the Xerox
Support website at
www.xerox.com/office/6600support.
Reset the paper tray guides. For details,
see Loading Paper on page 88.
Perform an automatic color registration
adjustment. For details, see
Registration on page 126.
Choose a different paper type in the at the
control panel, in the application, and in the
printer driver.
Replace the paper.
Reduce the humidity in the room or move
the printer to a new location.
®
Color