Xerox Phaser 6600 User Giude page 162

Troubleshooting
Symptom
Stray black dots or white areas
(dropouts).
• Vertical black or color
streaks or multiple colored
streaks or lines.
• Streaks in only one color.
Color around the edge of
printing is incorrect.
162 Phaser 6600 Color Printer
User Guide
Probable Causes
The paper is outside the
recommended specification
range.
There is debris on the rollers.
The toner cartridges are not
®
Xerox toner cartridges.
The toner cartridges are not
®
Xerox toner cartridges.
Debris in the printer is dragging
against the toner before it is
fused.
There is a problem with the
toner cartridge for that color.
The color registration is
incorrect.
Solutions
Replace the paper with a recommended
size and type, and confirm that your control
panel and print driver settings are correct.
For details, see Supported Paper
84.
Wipe the feed rollers with a clean damp
cloth to remove debris from the rollers.
Note: Do not touch the transfer roller or the
exposed end of the transfer belt.
Ensure that the toner cartridges meet
specifications and replace them if
necessary. For details, see
on page 133.
Ensure that the toner cartridges meet
specifications and replace them if
necessary. For details, see
on page 133.
Remove any debris or paper scraps from
the paper path under the rear cover.
Check the toner cartridge for damage and
replace if necessary. For assistance, go to
®
the Xerox Support website at
www.xerox.com/office/6600support.
Adjust the color registration. For details, see
Color Registration on page 126.
on page
Consumables
Consumables