Cleaning InstaClean
Fluid Filter
(XR models
only)
The InstaClean Fluid Filter prevents particles
from entering paint hose. After each use,
remove and clean it to insure peak perfor-
mance.
1. Turn power switch OFF.
2. Disconnect
airless spray
hose from
sprayer and
remove
InstaClean
First,
Fluid Filter.
unscrew hose
3. Check InstaClean Fluid Filter for debris. If
needed, clean filter with water and a soft
brush.
4. Install InstaClean Fluid Filter.
309225W
™
InstaClean filter
Then, unscrew
outlet fitting
Install open end of
InstaClean filter in
outlet fitting, then
screw outlet fitting
into sprayer outlet.
outlet fitting
5. Tighten outlet fitting
and reconnect hose to
sprayer.
Gun Fluid Filter
Clean gun fluid filter with compatible solvent
and a brush every time you flush the system.
Replace gun filter when damaged.
Shutdown and Cleaning
19