Unclogging Spray Tip - Graco MAGNUM 309225W Operation Manual

Installing Tip and Base
Installing Tip and Base
1. Engage trigger lock.
2. Verify tip and guard parts are assembled in
order shown.
retaining nut
guard
tip
Use tip to align seat
in guard.
3. Screw tip and guard
assembly on gun.
Tighten retaining nut.
12
black rubber
gasket
metal seat
Tip must be pushed
all the way into guard

Unclogging Spray Tip

To avoid fluid splashback:
• Never pull gun trigger when arrow-shaped
handle is between SPRAY and UNCLOG
positions.
• Tip must be pushed all the way into guard.
1. To UNCLOG tip obstruction, point
arrow-shaped handle backward to
UNCLOG position.
2. Aim gun at piece of scrap or cardboard.
3. Pull trigger to clear clog.
SPRAY position
(pull trigger to paint)
Point the arrow-shaped handle on the spray tip
attachment forward to SPRAY and backward to
UNCLOG obstructions.
UNCLOG position
(pull trigger to clear
clogged tip)
309225W