Pid Transponder Scan; Blind Transponder Scan - DREAM MULTIMEDIA Dreambox DM 100 User Manual

U s e r M a n u a l D r e a m b o x D M 1 0 0

8.3.3 PID transponder scan

Set the Mode option to PID by using the Navigation-Buttons left/right to scan a desired
PIDs on a single transponder.

8.3.4 Blind transponder scan

Set the Mode option to Blind by using the Navigation-Buttons left/right to scan the whole
possible range of transponders.
Mode : Select PIDmode.
TP Frequency : Set you desired transponder
frequency.
Symbol Rate : Set your desired symbol rate.
Polarity : Choose from Horizontal and Vertical.
PID: Enter your desired PID value.
Scan Type : Choose from All TV/Radio, All TV, All
Radio, Free TV, Free Radio.
LNB Frequency : Show the LNB Frequency which
was set up in the Antenna Setup menu.
Select the Scart Scan option and press the OK-
Button to start the automatic scan.
Mode : Select Blind mode.
Network Scan : Choose from on and off.
Scan Type : Choose from All TV/Radio, All TV, All
Radio, Free TV, Free Radio.
LNB Frequency : Show the LNB Frequency which
was set up in the Antenna Setup menu.
Select the Scart Scan option and press the OK-
Button to start the automatic scan.
31
english