Installation; Turning The Device On - DREAM MULTIMEDIA Dreambox DM 100 User Manual

U s e r M a n u a l D r e a m b o x D M 1 0 0
2.

Installation

2.1

Turning the device on

Place the batteries inside the battery compartment of the remote control keeping in mind
the right polarity.
Before using the Dreambox, please read the safety instructions (See chapter 1.1 Safety
instructions)
Connect the LNB or antenna with a coaxial cable to LNB in or Antenna in at your
Dreambox.
See chapter 1.3.2 Explanation rear panel.
Connect the Dreambox with a Scart cable to your television screen and if available
connect your DVD Player or VCR to the VCR Scart of the Dreambox.
Plug in the power cable into the Dreambox and then into a 110V/60Hz or 230V/50Hz
power socket.
If you are using a switchable power socket please shutdown your Dreambox into deep
standby before switching off the power socket. See chapter 4.1 Turning your Dreambox
on and off
If you switch on your Dreambox for the first time, you will see the setup wizard.
The setup wizard will guide you through the first time installation. Follow the instructions
on the screen.
Please note that the factory setting for the video format is CVBS (FBAS).
16
english