Level Calibration - PRESONUS Temblor T10 Owner's Manual

3 Tutorials
2.2 Hookup Diagrams
3.2

Level Calibration

Matching the levels of the all studio monitors in your
system is an easy extra step that will help you to achieve an
optimal listening environment. You will need an SPL meter
to do this; luckily, there are many inexpensive and free
SPL meter apps for just about every type of smartphone
that will do the job nicely. Below is a brief tutorial on
how to level match your monitors. Note: Make sure that
any effects processors (such as EQs, compressors, and
reverbs) have been bypassed. You'll want a clean signal.
1. Connect your studio monitors and
Temblor T10 as shown in the hook-up diagram
in Section 2.2.1.
2. Turn your Temblor T10 and your full-range
studio monitors' input levels to their lowest
setting.
0
GND
3. Play pink noise through your
primary audio source's outputs. You
should not hear anything yet.
Temblor T10
Owner's Manual
11