Port Os Control; Restore Default Values - ATEN CS1708A User Manual

CS1708 / CS1716
A A

Port OS Control

A port's operating system can be changed to match that of the computer
attached to the port. To change a port's operating system, key in the following
hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]
combination.
2. Key in [Function], where [Function] refers to one of the function keys in
the following table:
After pressing a function key you automatically exit Hotkey mode.

Restore Default Values

This administrator only hotkey restores the CS1708
See RESTORE DEFAULT VALUES, page 31. To restore the default values,
key in the following hotkey combination:
1. Invoke hotkey mode with the [Num Lock] + [-] or [Ctrl] + [F12]
combination.
2. Press [R].
3. Press [Enter].
After you press [Enter], the command line displays RESET TO DEFAULT
SETTING for three seconds; then the message disappears and you
automatically exit Hotkey mode.
44
User Manual
Key
F1 Sets the Port OS to Windows
F2 Sets the Port OS to Mac
F3 Sets the Port OS to Sun
Description
/ CS1716
A
default values.
A