Install The Gun And Mounting Bracket - Graco 244592 Instructions-Parts List Manual

Installation
Install the Gun and Mounting
Bracket
1. Loosen the mounting bracket's two set screws (103)
and slide the bracket (102) onto a 1/2 in. (13 mm)
mounting rod. See F
2. Position the gun and tighten the two set screws.
For added positioning reliability, insert a 1/8 in. (3 mm)
locating pin into the slot (NN) in the bracket and through
a hole in the rod. See the detail in F
12
. 4..
IG
. 4..
IG
103
9.24 in
(234.7 mm)
Fig. 4. Mounting Bracket
2.88 in
(73.2 mm)
NN
102
TI1738A
309298J
To
Nozzle
Tip