Fluid Line Accessories; Install The Gun And Mounting Bracket - Graco PRO AA5500sc unicarb Instruction Manual

Fluid Line Accessories

1. Install a fluid filter (N) and drain valve (M) in the
fluid supply. Filtering the fluid will help remove
coarse particles and sediment that could clog the
spray tip.
WARNING
INJECTION HAZARD
The fluid drain valve (M) is required in
your system to help relieve fluid pres-
sure in the fluid supply, hose and gun;
triggering the gun to relieve pressure may not be
sufficient. Install a drain valve close to the fluid
supply. The drain valve reduces the risk of serious
injury, including fluid injection and splashing in the
eyes or on the skin.
2. Install a fluid regulator in the fluid supply system to
control fluid pressure to the gun.

Install the Gun and Mounting Bracket

1. Loosen the mounting bracket's two square head
bolts (103) and slide the mounting bracket onto a
0.50 in. (12.7 mm) mounting rod. See Fig. 3.
2. Position the gun and tighten the two bolts (103)
securely.
Installation
0.50 in.
(12.7 mm)
rod
103
Fig. 3
NOTE: For added positioning reliability, the mounting
bracket (MM) has an 1/8 in. (3.2 mm) slot where a
locating pin (NN–not included) can be inserted through
the mounting rod (PP). See Fig. 4.
Fig. 4
PRO AA5500sc Gun
103
9.32 in.
(236.7 mm)
NN
MM
PP
308937
2.775 in.
(70.5 mm)
03619
03460
11