Supero AOC-SIMSO User Manual page 43

Chapter 3: Software Application and Usage
c. Security
Device Settings: Security
2
3
4
5
6
7
8
9
1
c. Security
1. Security: Click on this function key to activate its submenu and configure the fol-
lowing Security settings as listed below.
2. Encryption Settings: This window allows you to configure encryption settings.
3. Force HTTPS for Web Access: Check this box to enable the function-Force
HTTPS for Web Access. If enabled, you will need to use an HTTPS connection to
access to the web.
4. KVM Encryption: This option allows you to configure the encryption of the RFB
protocol. RFB is used by the remote host to transmit video data displayed in the host
monitor to the local administrator machine, and transmit keyboard and mouse data
from the local administrator machine back to the remote host.
If set to "Off," no encryption will be used. If set to "Try," the applet (-JVM of the remote
host) will attempt to make an encrypted connection. In this case, when a connection
cannot be established, an unencrypted connection will be used. If set to "Force," the
applet will make an encrypted connection. In this case, an error will be reported if no
connection is made.
5. IP Access Control: This section allows you to configure the IP Access Control
settings listed below.
3-29