Supero AOC-SIMSO User Manual page 41

Chapter 3: Software Application and Usage
b. Dynamic DNS
Device Settings: Dynamic DNS
2
3
4
5
6
7
8
9
1
b. Dynamic DNS
1. Dynamic DNS: Click on this function key to activate its submenu and configure
the following Dynamic DNS (-Domain Name Server) settings as listed below.
2. Enable Dynamic DNS: Check this box to enable the Dynamic DNS service.
3. Dynamic DNS Server www.dyndns.org: Click this link to access the DynDNS
web site. This is the server name where the DDNS Service is registered.
4. DNS System: Dynamic DNS (Item#2 above) is enabled, you can select from the
options: Custom or Dynamic from the selection menu. Select "Custom" to use your
own system as the DNS server. Select Dynamic to use the pre-configured Dynamic
DNS as your server.
5. Hostname: Enter the name you want to use for the remote host server.
6/7. Username/Password: Enter the username and the password for the remote
host user.
8. Check time (HH:MM): Enter the time the SIMLP card first registers with the DNS
server in the HH:MM Format. (e.g. 07:25, 19:30)
3-27