Ringing Signal - Ericsson Dialog 4220 Lite User Manual

*00*
1*1
1*2
í
2*0
í
3*0
í
BusinessPhone – Dialog 4220 Lite / Dialog 3210

Ringing signal

By programming, you can adjust ringing type (2 types), ringing
volume (10 steps) and ringing character (10 characters).
Enter Programming mode.
You can now select ringing type, volume or character.
Ringing type
Select type 1 if you want to set the ringing volume at a constant
level, select type 2 if you want gradually increasing volume when
the phone rings.
Press.
Or:
Press.
You will hear the selected type.
Press to finish the procedure.
Note: When type 2 is selected, the programming of the
ringing volume is not applicable.
9
Ringing volume
– Press.
You will hear the selected volume (0...lowest volume, 9...highest).
You only have to press the last digit to select another ringing
volume.
Press to finish the procedure.
Note: This programming is not applicable when you have
selected ringing type 2.
9 Ringing character
– Press.
You will hear the selected character. You only have to press the
last digit to select another ringing character.
Press to finish the procedure.
Settings
87